The table shows the pin configuration of the Arduino UNO–based robotic arm. The red (VCC) wires of all servos are connected ...

OpenSplitDeck is shaping up to be a seriously impressive controller.

Home automation with high usefulness and low annoyance tends to rely on reliable person sensing, and [francescopace]’s ...

ACEBOTT QD023 is an ESP32-based wearable gesture control glove that tracks finger movements with potentiometers instead of more traditional flex sensors.

Here’s something fun from [Chad Kapper] over on HackMakeMod: Escape Room Lockbox with the Cheap Yellow Display. You may have heard of the “cheap yellow display” (CYD), so-called due to the board’s ...

The Sharp GP2AP03VT00F Time-Of-Flight sensor seems to be a nice part for makers and roboticists, focusing on good short distance sensing where other parts sometimes have problems. Alas, Sharp seems to ...

This readme provides instructions on how to build / use a Meshtastic I2C sensor in both host and client modes. There are two PlatformIO environments available as examples to build off of: kb2040_host ...

Abstract: This paper presents results of patient experiments using a new gait-phase detection sensor (GPDS) together with a programmable functional electrical stimulation (FES) system for subjects ...

Abstract: Numerous systems have been proposed to reduce the chance of theft and other security issues relating to bicycle rental systems, including a key-operated portable locking device with a ...

A small portable device featuring timer, clock, and calendar functions, equipped with a simple and functional interface and a ...